Harmonized System

Show last update onlyCorrelation Tables
1557 results for "俄勒冈大学学历学位认证<网址:ｂｚｗ９８５.ｃｏｍ>德州俄亥俄北方大学学位证电子图-仿制假新西兰国立西部理工学院成绩单<网址:ｚｊｗ２１１.ｃｏｍ>仿制假伯明翰中英格兰大学文凭tt"

Section XVIII > Chapter 91 > Heading 9108

Explanatory notes

… movements with an electronic digital time display (light-emitting diodes (LED) or liquid crystal display (LCD)). … rhodium‑plated, silvered, gilded, varnished, etc. Battery or accumulator powered watch movements are …

Section XI > Chapter 59 > Heading 5901

Explanatory notes

… These are generally plain weave woven fabrics, usually of cotton, linen or man‑made fibres, heavily coated with gum or … . Tracing cloths are fine close woven fabrics, usually of cotton or linen, which have been treated (e.g., with a … . Prepared painting canvas, usually of linen, hemp or cotton, sized and then coated on one surface with a mixture …

Section V > Chapter 27 > Heading 2711

Explanatory notes

… in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not … exceeding 300 cm 3 ( other than those constituting parts of cigarette or similar lighters) ( heading 36.06 ). (c)   …

Section I > Chapter 5 > Heading 0507

Explanatory notes

… scraping, cleaning, removal of superfluous parts, trimming, splitting, cutting other than to shape, rough planing, straightening or flattening : (A)  Ivory . Throughout the Nomenclature, the …

Section XV > Chapter 83 > Heading 8308

Explanatory notes

… also covers break mandrel blind rivets , where during the setting operation the mandrel is pulled into or against the … etc. Beads are generally spherical or tubular or sometimes facetted; spangles, generally of geometrical form (round, … (usually Chapters 73 to 76 ). (d)   Press‑studs and push‑buttons ( heading 96.06 ). (e)   Slide fasteners and parts …

Section XIII > Chapter 70 > Heading 7014

Explanatory notes

… are generally obtained by simple moulding or pressing or by cutting from sheets, strips, lumps or slabs. The articles … (e.g., heading 83.10 , in the case of sign-plates, numbers, letters and other signs, of base metal, heading 85.12 in the …

Section XV > Chapter 73 > Heading 7305

Explanatory notes

… products not in coils. In the case of welded articles, the abutting edges are welded without filler metal by … oxidation. As regards products obtained by riveting, the abutting edges are overlapped and joined by rivets. The … of heading 73.03, 73.04 or 73.06 . (b)   Tube or pipe fittings of iron or steel ( heading 73.07 ). (c)   Tubes or …

Section XV > Chapter 81 > Heading 8101

Explanatory notes

… a dense, steel‑grey metal, with a high melting point. It is brittle, hard and has a high resistance to corrosion. … sintered bars and rods, or as waste and scrap (for the latter see the Explanatory Note to heading 72.04); (C)  … as used in the manufacture of the working tips and edges of cutting tools or dies. This carbide is classified as …

Section XV > Chapter 72 > Heading 7211

Explanatory notes

… a thickness of not less than 4 mm, not in coils and without patterns in relief 7211.14 - - Other, of a thickness of … be subsequently cold‑rolled to give a thinner product and a better quality finish. Strip is also produced by slitting “wide coil”, “sheets” or “plates” of heading 72.08 …

Section XVII > Chapter 87 > Heading 8714

Explanatory notes

… of a kind used with motorcycles (including mopeds), cycles fitted with an auxiliary motor, side-cars, non-motorised … (windshields). (23)   Luggage racks; lamp brackets; water‑bottle brackets. (24)   Propelling levers and crank-handles, … They are presented cut to length and equipped with end fittings. …

WCO Trade Tools provides essential information to support your trade activity.

Show Pricing