Harmonized System

Show last update onlyCorrelation Tables
3202 results for "办理假米尔顿赫希医学中心文凭毕业证<网址:ｚｊｗ２１１.ｃｏｍ>长春办理圣地亚哥大学毕业证成绩单-北诺丁汉学院在读证明办理<网址:ｚｊｗ２１１.ｃｏｍ>毕业了如何取得学位证ON"

Section XVII > Chapter 87 > Heading 8703 > 8703.2 > 8703.22

Classification opinions

… hybrid” with a 1.5-litre turbocharged four-cylinder spark-ignition engine producing 135 kW and 280 Nm of torque. It is … / generator that can boost the engine's output by an additional 10 kW and 160 Nm of torque. This starter / generator allows for smoother engine start-stop operation and energy recovery during coasting. This vehicle …

Section IX > Chapter 44 > Heading 4418 > 4418.30

Classification opinions

… boards used as structural studs in the framing of a house, consisting of rectangular pieces of solid wood measuring … cm (1 1/2 inches ) thick and 8.25 cm (3 1/4 inches) wide, precision end trimmed in lengths of 243.84 cm to 365.76 cm … edges and unworked ends. There are drilled holes, 2.54 cm (one inch) in diameter, centred about 40.64 cm (16 inches) …

Section XI > Chapter 58 > Heading 5810 > 5810.9 > 5810.92

Classification opinions

… 1. Embroidery width 2.5 to 11.5 cm, worked on a ground of two differently coloured woven fabrics laid … their length because the embroidery overlaps each. Adoption : 1989 … 2. Embroidered piece of woven fabric, … piece of fabric is intended to be made up into more than one garment. See also Opinion 6214.10 to 6214.90/1. Adoption …

Section XI > Chapter 58 > Heading 5810 > 5810.9 > 5810.99

Classification opinions

… 1. Embroidery width 2.5 to 11.5 cm, worked on a ground of two differently coloured woven fabrics laid … their length because the embroidery overlaps each. Adoption : 1989 … 2. Embroidered piece of woven fabric, … piece of fabric is intended to be made up into more than one garment. See also Opinion 6214.10 to 6214.90/1. Adoption …

Section XX > Chapter 94 > Heading 9403 > 9403.9 > 9403.99

Classification opinions

… runners designed to receive a sliding drawer. Each side consists of a double-walled metal profile together with a … the notches are designed to accommodate the runners, the front, the rear and the bottom of the drawer. The sides are … is intended. The drawer sides are manufactured to specific dimensions and are used with other parts to form furniture …

Section VII > Chapter 39 > Heading 3926 > 3926.40

Classification opinions

… 22.5 cm in height and 14 cm in width.  A power cord connects the product to a transformer of an effect of 3.6 W … is 0.02 W. Application of GIRs 1, 3 (b) and 6. See also Opinions 9505.10/1, 9505.10/2, 9505.10/3 and 9505.10/4 Adoption : 2023   …

Section VI > Chapter 34 > Heading 3402 > 3402.90

Classification opinions

… 1. Surface-active preparation consisting of an alkyltrimethylammonium chloride dissolved … particular, as a gel sensitiser in foam rubber manufacture. Adoption : 1968 …

Section VI > Chapter 29 > Heading 2905 > 2905.4 > 2905.49

Classification opinions

… esters (e.g., glyceryl benzenesulphonate), formed by the reaction of acidfunction organic compounds of heading 29.04 with glycerol of subheading 2905.45. Adoption : 1996 …

Section VI > Chapter 38 > Heading 3823 > 3823.1 > 3823.19

Classification opinions

… 1. Mixtures of trialkylacetic acids having 9 to 11 atoms of carbon. Adoption : 1994 … 2. 12-Hydroxystearic acid, less than 90 % pure. See also Opinion 2918.19/1. Adoption : 1995 …

Section XV > Chapter 73 > Heading 7321 > 7321.1 > 7321.19

Classification opinions

… 1. Non-electric domestic barbecue, of stainless steel, operating by means of steel mirrors and using only solar energy for cooking. Application of GIRs 1 and 6. Adoption : 2001 …