Harmonized System

Show last update onlyCorrelation Tables
1803 results for "学士学位证学校不颁发怎么办<网址:ｚｊｗ２１１.ｃｏｍ>永济小学入学 房产证 不动产证-怎么办假密歇根州立大学文凭<网址:ｂｚｗ９８５.ｃｏｍ>休斯敦大学毕业证办理sh"

Section XIII > Chapter 68 > Heading 6807 > 6807.90

Classification opinions

… the upper side, a weatherproofing element consisting of a sheet of paper board covered on both sides with bitumen or … (ii) on the underside, an element called a "vapour shield" or "steam barrier" consisting of a sheet of paperboard or aluminium foil also covered on both …

Section XIII > Chapter 70 > Heading 7007 > 7007.1 > 7007.19

Classification opinions

… respectively. After the glass is cut into the desired shape and strengthened, it is coated to improve its … body with rounded edges. After the glass is cut into shape and strengthened, it is printed and coated to improve its performance (e.g., non-conductive shielding ink printing and anti-fingerprint coatings). The …

Section XVIII > Chapter 90 > Heading 9029 > 9029.20

Classification opinions

… 1. Flash apparatus for stroboscopic checking of ignition timing … to step-up to the 450 volts required to operate the flash tube; (iii) a synchronous vibrator; (iv) capacitors to … one sparking plug of the engine under test, produces flashes synchronised with the sparking of that plug. …

Section XV > Chapter 73 > Heading 7326 > 7326.90

Classification opinions

… conveyor or elevator belts, of iron or steel strip or sheet, endless, not combined with other goods to form … by "impact extrusion", not having acquired the approximate shape of the final article, intended, according to the … link , of steel, consisting of two symmetrical arc-shaped elements linked into an articulated joint by means of …

Section XVI > Chapter 84 > Heading 8482 > 8482.40

Classification opinions

… : 14 mm). The product is designed to be incorporated to a shaft as the inner raceway and assembled with a gear as the … : 40 mm). The product is designed to be incorporated to a shaft as the inner raceway and assembled with a gear as the … outer raceway. The product is intended to make a driving shaft rotate smoothly and to reduce friction. This assembly …

Section X > Chapter 48 > Heading 4811 > 4811.5 > 4811.59

Classification opinions

… to be packaged therein, covered with a thin transparent sheet of polyethylene on both faces, in rolls of a width … therein, covered on that face with a thin transparent sheet of polyethylene and lined on the other face (on the … with aluminium foil covered with a thin transparent sheet of polyethylene, in rolls of a width exceeding 15 cm …

Section XVII > Chapter 87 > Heading 8716 > 8716.90

Classification opinions

… a triangular sign plate of red plastics, with small pyramid-shaped bosses to improve the reflecting properties, mounted … system of semi-trailers.  The product is designed to absorb shocks and bumps and to act as a vibration isolator and … semi-trailers or buses. The product is designed to absorb shocks and bumps and to act as a vibration isolator and …

Section XII > Chapter 64 > Heading 6402 > 6402.9 > 6402.99

Classification opinions

… 1. Light-weight shoes, the outer sole and the upper of which are made of … pool, in the home, etc. Adoption : 1986 … 2. Postoperative shoes , not covering the ankle, designed for patients … a PVC foam insole and a ridged plastic outer sole. These shoes, which are closed at the front by two hook and loop …

Section XVI > Chapter 85 > Heading 8543 > 8543.70

Classification opinions

… or special glass); (ii) electrical leads; (iii) two thin sheets, usually of plastics, sealing and protecting the … converter which is designed to be mounted on an aerial (dish) of a system for receiving satellite broadcasts and is … scanner for video presentations); one of these units shows digital operations conducted by the central processing …

Section V > Chapter 27 > Heading 2710 > 2710.9 > 2710.91

Classification opinions

… to be «worked», the Worked Cone Penetration (ASTM D 217) should be omitted, and the sample should be submitted directly to the Cone Penetration (ASTM D …