… the flux (e.g., zinc chloride, ammonium chloride, borax, quartz, resin or lanolin) which would otherwise have to be … shaped for use, or in strip form suitable for cutting as required. The heading also includes wire and rods obtained …
… (by tin‑plating, electroplating, varnishing, enamelling, lacquering, painting, coating with plastics, etc.). They are … as trademarks. (6) Cutting into rectangular (including square) shape. (7) Operations intended exclusively to …
… - Other : 7214.91 - - Of rectangular (other than square) cross-section 7214.99 - - Other Other bars and rods … 72.07). Their cross‑section is uniform and when it is square or rectangular has sharp edges. (2) They have a …
… of lard or other rendered pig fat. It is a yellowish liquid with a faintly greasy odour and pleasant taste, used … a lubricant. Tallow oil (inedible oleo‑oil) is a yellowish liquid, smells of tallow, and turns rancid very easily when …
… pericarp. Husked rice almost always still contains a small quantity of paddy. (3) Semi‑milled rice , that is to say, … cylinders. Wholly milled rice may be polished and subsequently glazed to improve its appearance. The polishing …
… paper or fabric backings, or in decorative sheets imitating marquetry. Woods used for the manufacture of plywood are … The heading also includes short lengths of approximately square cross-section and about 3 mm in thickness used in …
… chemical resistance to most reagents, including acids (aqua regia, however, attacks it). It is, after silver and … derived from the processing of blister copper and is subsequently refined to separate its constituent metals. …
… This heading also includes divers’ helmets which require to be fitted to divers’ suits before they are … (a) Masks for protection against dust, odours, etc., not equipped with a replaceable filter, but consisting of …
… fitted nor designed to be fitted with mechanical or thermal equipment; electroplating anodes. Gold anodes may be in the form of sheets of pure gold cut to the required size and drilled at two corners for attachment of …
