Notes.

1.‑ For the purposes of this Chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m²).

2.‑ This Chapter does not cover :

(a) Articles of Chapter 30;

(b) Stamping foils of heading 32.12;

(c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33);

(d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05);

(e) Sensitised paper or paperboard of headings 37.01 to 37.04;

(f) Paper impregnated with diagnostic or laboratory reagents (heading 38.22);

(g) Paper‑reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 48.14 (Chapter 39);

(h) Articles of heading 42.02 (for example, travel goods);

(ij) Articles of Chapter 46 (manufactures of plaiting material);

(k) Paper yarn or textile articles of paper yarn (Section XI);

(l) Articles of Chapter 64 or Chapter 65;

(m) Abrasive paper or paperboard (heading 68.05) or paper‑ or paperboard‑backed mica (heading 68.14) (paper and paperboard coated with mica powder are, however, to be classified in this Chapter);

(n) Metal foil backed with paper or paperboard (generally Section XIV or XV);

(o) Articles of heading 92.09; or

(p) Articles of Chapter 95 (for example, toys, games, sports requisites) or Chapter 96 (for example, buttons).

3.‑ Subject to the provisions of Note 7, headings 48.01 to 48.05 include paper and paperboard which have been subjected to calendering, super‑calendering, glazing or similar finishing, false water‑marking or surface sizing, and also paper, paperboard, cellulose wadding and webs of cellulose fibres, coloured or marbled throughout the mass by any method. Except where heading 48.03 otherwise requires, these headings do not apply to paper, paperboard, cellulose wadding or webs of cellulose fibres which have been otherwise processed.

4.‑ In this Chapter the expression “ newsprint ” means uncoated paper of a kind used for the printing of newspapers, of which not less than 50 % by weight of the total fibre content consists of wood fibres obtained by a mechanical or chemi-mechanical process, unsized or very lightly sized, having a surface roughness Parker Print Surf (1 MPa) on each side exceeding 2.5 micrometres (microns), weighing not less than 40 g/m² and not more than 65 g/m².

5.‑ For the purposes of heading 48.02, the expressions “paper and paperboard, of a kind used for writing, printing or other graphic purposes” and “non perforated punch-cards and punch tape paper” mean paper and paperboard made mainly from bleached pulp or from pulp obtained by a mechanical or chemi-mechanical process and satisfying any of the following criteria :

For paper or paperboard weighing not more than 150 g/m² :

(a) containing 10 % or more of fibres obtained by a mechanical or chemi-mechanical process, and

1. weighing not more than 80 g/m², or

2. coloured throughout the mass; or

(b) containing more than 8 % ash, and

1. weighing not more than 80 g/m², or

2. coloured throughout the mass; or

(c) containing more than 3 % ash and having a brightness of 60 % or more ; or

(d) containing more than 3 % but not more than 8 % ash, having a brightness less than 60 % , and a burst index equal to or less than 2.5 kPa m²/g; or

(e) containing 3 % ash or less, having a brightness of 60 % or more and a burst index equal to or less than 2.5 kPa m²/g.

For paper or paperboard weighing more than 150 g/m² :

(a) coloured throughout the mass; or

(b) having a brightness of 60 % or more, and

1. a caliper of 225 micrometres (microns) or less, or

2. a caliper more than 225 micrometres (microns) but not more than 508 micrometres (microns) and an ash content more than 3 %; or

(c) having a brightness of less than 60 %, a caliper of 254 micrometres (microns) or less and an ash content more than 8 %.

Heading 48.02 does not, however, cover filter paper or paperboard (including tea‑bag paper) or felt paper or paperboard.

6.‑ In this Chapter “ kraft paper and paperboard ” means paper and paperboard of which not less than 80 % by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes.

7.‑ Except where the terms of the headings otherwise require, paper, paperboard, cellulose wadding and webs of cellulose fibres answering to a description in two or more of the headings 48.01 to 48.11 are to be classified under that one of such headings which occurs last in numerical order in the Nomenclature.

8.‑ Headings 48.01 and 48.03 to 48.09 apply only to paper, paperboard, cellulose wadding and webs of cellulose fibres :

(a) in strips or rolls of a width exceeding 36 cm; or

(b) in rectangular (including square) sheets with one side exceeding 36 cm and the other side exceeding 15 cm in the unfolded state.

9.‑ For the purposes of heading 48.14, the expression “ wallpaper and similar wall coverings ” applies only to :

(a) Paper in rolls, of a width of not less than 45 cm and not more than 160 cm, suitable for wall or ceiling decoration :

(i) Grained, embossed, surface‑coloured, design‑printed or otherwise surface‑decorated (for example, with textile flock), whether or not coated or covered with transparent protective plastics;

(ii) With an uneven surface resulting from the incorporation of particles of wood, straw, etc.;

(iii) Coated or covered on the face side with plastics, the layer of plastics being grained, embossed, coloured, design‑printed or otherwise decorated; or

(iv) Covered on the face side with plaiting material, whether or not bound together in parallel strands or woven;

(b) Borders and friezes, of paper, treated as above, whether or not in rolls, suitable for wall or ceiling decoration;

(c) Wall coverings of paper made up of several panels, in rolls or sheets, printed so as to make up a scene, design or motif when applied to a wall.

Products on a base of paper or paperboard, suitable for use both as floor coverings and as wall coverings, are to be classified in heading 48.23.

10.- Heading 48.20 does not cover loose sheets or cards, cut to size, whether or not printed, embossed or perforated.

11.‑ Heading 48.23 applies, inter alia, to perforated paper or paperboard cards for Jacquard or similar machines and paper lace.

12.‑ Except for the goods of heading 48.14 or 48.21, paper, paperboard, cellulose wadding and articles thereof, printed with motifs, characters or pictorial representations, which are not merely incidental to the primary use of the goods, fall in Chapter 49.

°

° °

Subheading Notes.

1.‑ For the purposes of subheadings 4804.11 and 4804.19, “ kraftliner ” means machine‑finished or machine‑glazed paper and paperboard, of which not less than 80 % by weight of the total fibre content consists of wood fibres obtained by the chemical sulphate or soda processes, in rolls, weighing more than 115 g/m² and having a minimum Mullen bursting strength as indicated in the following table or the linearly interpolated or extrapolated equivalent for any other weight.

Weight g/m²		Minimum Mullen bursting strength kPa
115 125 200 300 400		393 417 637 824 961

2.‑ For the purposes of subheadings 4804.21 and 4804.29, “ sack kraft paper ” means machine‑finished paper, of which not less than 80 % by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes, in rolls, weighing not less than 60 g/m² but not more than 115 g/m² and meeting one of the following sets of specifications :

a) Having a Mullen burst index of not less than 3.7 kPa m²/g and a stretch factor of more than 4.5 % in the cross direction and of more than 2 % in the machine direction.

b) Having minima for tear and tensile as indicated in the following table or the linearly interpolated equivalent for any other weight :

	Minimum tear mN	Minimum tensile kN/m
Weight g/m²	Machine direction	Machine direction plus cross direction	Cross direction	Machine direction plus cross direction
60 70 80 100 115	700 830 965 1,230 1,425	1,510 1,790 2,070 2,635 3,060	1.9 2.3 2.8 3.7 4.4	6 7.2 8.3 10.6 12.3

3.‑ For the purposes of subheading 4805.11, “semi-chemical fluting paper” means paper, in rolls, of which not less than 65 % by weight of the total fibre content consists of unbleached hardwood fibres obtained by a semi-chemical pulping process, and having a CMT 30 (Corrugated Medium Test with 30 minutes of conditioning) crush resistance exceeding 1.8 newtons/g/m² at 50 % relative humidity, at 23 °C.

4.‑ Subheading 4805.12 covers paper, in rolls, made mainly of straw pulp obtained by a semi-chemical process, weighing 130 g/m² or more, and having a CMT 30 (Corrugated Medium Test with 30 minutes of conditioning) crush resistance exceeding 1.4 newtons/g/m² at 50 % relative humidity, at 23 °C.

5.‑ Subheadings 4805.24 and 4805.25 cover paper and paperboard made wholly or mainly of pulp of recovered (waste and scrap) paper or paperboard. Testliner may also have a surface layer of dyed paper or of paper made of bleached or unbleached non-recovered pulp. These products have a Mullen burst index of not less than 2 kPa·m²/g.

6.‑ For the purposes of subheading 4805.30, “ sulphite wrapping paper ” means machine‑glazed paper, of which more than 40 % by weight of the total fibre content consists of wood fibres obtained by the chemical sulphite process, having an ash content not exceeding 8 % and having a Mullen burst index of not less than 1.47 kPa m²/g.

7.‑ For the purposes of subheading 4810.22, “ light‑weight coated paper ” means paper, coated on both sides, of a total weight not exceeding 72 g/m², with a coating weight not exceeding 15 g/m² per side, on a base of which not less than 50 % by weight of the total fibre content consists of wood fibres obtained by a mechanical process.

°

° °

Subheading Explanatory Notes.

Subheading Note 1

In this Note the minimum Mullen bursting strength is expressed in kilopascals (kPa). The g/cm² equivalents are as follows :

Weight g/m²		kPa		g/cm²
115 125 200 300 400		393 417 637 824 961		4,030 4,250 6,500 8,400 9,800

The calculation of the intermediate values (interpolation) or of values of more than 400 g (extrapolation) should be based on the following formulae :

Basis weight		Minimum Mullen bursting strength g/cm²
Not exceeding 125 g/m²	Basis weight (g/m²) x 22 + 1,500
Exceeding 125 g/m² but not exceeding 200 g/m²	Basis weight (g/m²) x 30 + 500
Exceeding 200 g/m² but not exceeding 300 g/m²	Basis weight (g/m²) x 19 + 2,700
Exceeding 300 g/m²	Basis weight (g/m²) x 14 + 4,200

Subheading Note 2

For papers of weights per m² falling between the values indicated in this Note, the minima could be calculated (with an error not exceeding 2 %) on the basis of the following table :

		Minimum
Tear, machine direction (mN) (rounded to nearest 0 or 5 millinewton)	Basis weight (g/m²) x 13.23 ─ 94.64
Tear, machine direction plus cross direction (mN) (rounded as indicated above)	Basis weight (g/m²) x 28.22 ─ 186.2
Tensile, cross direction (kN/m)	Basis weight (g/m²) x 0.0449 ─ 0.8186
Tensile, machine direction plus cross direction (kN/m)	Basis weight (g/m²) x 0.1143 ─ 0.829

Connectez-vous accéder à ce contenu et aux fonctionnalités.

Se connecter

Pas encore de compte ? En savoir plus sur nos offres d'abonnement.

Tarifs

Connectez-vous accéder à ce contenu et aux fonctionnalités.

Se connecter

Pas encore de compte ? En savoir plus sur nos offres d'abonnement.

Tarifs

Connectez-vous accéder à ce contenu et aux fonctionnalités.

Se connecter

Pas encore de compte ? En savoir plus sur nos offres d'abonnement.

Tarifs

Système harmonisé

PULP OF WOOD OR OF OTHER FIBROUS CELLULOSIC MATERIAL; RECOVERED (WASTE AND SCRAP) PAPER OR PAPERBOARD; PAPER AND PAPERBOARD AND ARTICLES THEREOF

PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD

UNCOATED KRAFT PAPER AND PAPERBOARD, IN ROLLS OR SHEETS, OTHER THAN THAT OF HEADING 48.02 OR 48.03

-- Bleached uniformly throughout the mass and of which more than 95 % by weight of the total fibre content consists of wood obtained by a chemical process